Installing Veneer Faced Black Dyed T&G Panelling

Installing veneer faced tongue and groove panelling is a little more tricky than paintable T&G panelling as it cannot be screwed, filled and painted. Having said that, it is likely that adhesive alone will be OK.

To ensure the best possible chance of success we would recommend that you score the back of the panels and the wall to provide a key and improve adhesion. A light coat or two of SBR or PVA on the wall will also help, especially on older dusty walls.

If you do find that your panels are not sticking to the wall, fine panel pins driven at an angle through the grooves and partially into the wall should do the trick. Once the adhesive has dried the pins can be removed and the holes filled with a black wood filler.

An alternative to pins would be to apply temporary pressure to the panels using pieces of furniture, step ladders, planks of wood etc leant against the panels in strategic places. Naturally you will need to protect the panels from any potential damage.

Why Choose Our T&G Panelling Packs?

• Convenient pack sizes – Each pack contains multiple panels in a range of sizes so you can choose the most cost effective option to panel your wall…
  • 2400mm × 600mm (pack of 2)
  • 1200mm × 600mm (pack of 5)
  • 1000mm × 600mm (pack of 6).
• Multiple groove pitches – A wide range of “standard” groove spacings to ensure you get the perfect look for your interior design project…
  • 50mm
  • 75mm
  • 100mm
  • 120mm
  • 150mm
  • 200mm
• Ideal for any space – Perfect for feature walls, hallways, bedrooms, living rooms, and commercial interiors.
• Easy to cut – Because the panels have an MDF core they are easy to cut with the right tools.
• Easy to install – Panels can often be bonded to walls using nothing more than a wall panel adhesive.
• Lacquered and unlacquered options – Choose between unlacquered or pre-lacquered finish.
• Matching Dado Rails – A choice of matching dado rails to trim the top of your panels upon request.

• Material – Walnut veneer faced black dyed MDF.
• Brand – Finsa.
• Thickness – 11mm
• Groove Size – 6mm wide x 3mm deep.
• Groove Pitch – 50mm, 75mm, 100mm, 120mm, 150mm & 200mm.

Options

• Matching Dado Rail – Matching Dado rails available upon request.
• Pre-lacquering – pre-sanded then lacquered with a water based white primer.
• Certification – PEFC/FSC certification upon request.

Samples

Free samples of this product are available upon request. The size of the sample is relative to the pitch of the groove. Please email us at [email protected] confirming the product you require and the address you would like them sent to.