A real-wood European white oak faced tongue-and-groove MDF board that delivers a very realistic solid oak T&G panel effect. We produce this product in-house and can supply it cut to size to fit your wall or cut to individual panel sizes or as full sheets.
- Material – European Oak on a Standard MDF core.
- Panel thickness – 6, 10,13, 16 & 19mm.
- Panel Size – Cut to size or full sheets.
- Max sheet size – 2400mm x 1200mm or 1200 x 2400.
- Delivery – 3-7 working days.
Oak faced Tongue & Groove Wall Panelling
Our oak-faced tongue-and-groove panelling is the closest you will get to a solid oak T&G panel without using solid oak. Despite its MDF core, the grooves blend well with the natural colour of the face making it very difficult to tell apart from the real thing.
To complement your panelling, we also produce a solid oak, rebated dado rail that is perfect for oak tongue and groove, oak slat wall and our oak bead & butt products
You can seal the panelling and the dado using any suitable wood-based products such as oil or water-based PU lacquers. If you are planning on using a wood dye, we would recommend you try it on one or more of our free samples.
The grooves are 6mm wide x 3mm deep with six standard pitch variants including 50mm, 75mm, 100mm, 120mm, 150mm and 200mm.
If you would like to find out more about our oak-faced T&G panels, or discuss a particular project, then please call us on 01604 864888.
How to order Oak faced T&G Panelling Cut to Size
Our oak faced T&G is available in full sheets and two cut to size options, one for ordering panels cut to fit your walls and the other for ordering individual cut to size panels.
Option 1: Enter your wall dimensions
To order your panels to fit your wall, select our Wall Size option. You can then enter your desired panelling height and then the overall width of your wall. We will take your dimensions and work out the optimum number of panels and ensure the end spacings are equal and optimised for size.
To add a second wall, add the first wall to your basket and then start the process again. If it is an adjoining wall, you will need to remove the thickness of the panelling from the overall length.
When ordering via this method, we assume the grooves will run vertically from floor to ceiling.
Option 2: Individual panel sizes
To order individual, cut to size panels, please select the Panel Size option and simply enter the dimensions you require for each panel.
You will also need to select the orientation of the panels, remembering that portrait orientation is tall and slim and landscape is short and wide
Whichever ordering method you choose, please ensure you select your preferred thickness and the pitch of the groove. We will ensure the spaces are centred and equally spaced along the board.
Specifications
- Material – Oak veneer faced MDF.
- Brand – Decospan
- Thickness – 6mm,10mm, 13mm, 16mm, 19mm & 23mm
- Max Sheet Size – 2400 x 1200/1200 x 2400 (trimmed).
- Groove Size – 6mm wide x 3mm deep.
- Groove Pitch – 50mm, 75mm, 100mm, 120mm, 150mm & 200mm.
Options
- Finish – 20% Sheen water-based polyurethane (PU) Lacquer.
- Certification – PEFC/FSC certification upon request.
Samples
Free samples of this product are available upon request. The size of the sample is relative to the pitch of the groove. Please email us at [email protected] confirming the product you require and the address you would like them sent to.
Installation and aftercare
You can install the wall panelling using a high-grab wall panelling adhesive. If additional support is required, then fine pins driven half their length into the groove would be the best option. Once the adhesive has dried, you can remove the pins and fill the small holes with an oak-coloured interior wood filler.
You can seal the panelling and the dado using any suitable wood-based products such as oil or water-based PU lacquers. We would strongly recommend that you do this immediately after installation.
The MDF v-grooves should be sanded prior to the first and second coats of lacquer or varnish.
If you are planning on using a dye, we would recommend you test it on a sample beforehand. We can supply small samples for testing if required.
FAQs
Can the oak face be varnished?
Absolutely, we would recommend you use an interior water-based PU varnish as they are hard wearing and quick drying.