Oak Faced Black Tongue & Groove Panelling Packs
£1.00 excl. VAT
Oak Faced Black Tongue & Groove Panelling Packs
£1.00 excl. VAT
Oak faced black MDF tongue-and-groove panelling packs, easy to handle, easy to install. Supplied in convenient pack sizes, with multiple groove pitch and thickness options to suit your project.
- Material – Oak veneer faced black dyed MDF.
- Panel thickness – 11mm & 19mm.
- Panel Size – 2400 x 600, 1200 x 600 & 1000 x 600.
- Groove pitch – Various (see below).
- Pack Quantity – Various (see below).
- Delivery – 3-7 working days.
Oak veneered black MDF Tongue & Groove Panelling Packs
Our oak veneered black MDF panelling packs have been created with convenience in mind particularly in relation to their handling and shipping compared to full size panels.
Their narrow width avoids courier width restrictions allowing them to be sent to any mainland UK location whilst the ease handling helps to minimise the risk of damage.
To ensure the most flexible and cost-effective options these beautiful oak veneer panels are offered in three sizes, 2400mm x 600mm, 1200 x 600mm and 1000mm x 600mm. The design of the panels means they can be fitted together, side by side, with no noticeable join.
Another feature of our panels is the choice of groove spacing (pitch) options we provide as standard. This allows you to choose otherwise bespoke spacing to create a unique look
If you would like to learn more about our oak faced black MDF T&G wall panelling packs, please give us a call or email the team on [email protected]
Installing Veneer Faced Black Dyed T&G Panelling
Installing veneer faced tongue and groove panelling is a little more tricky than paintable T&G panelling as it cannot be screwed, filled and painted. Having said that, it is likely that adhesive alone will be OK.
To ensure the best possible chance of success we would recommend that you score the back of the panels and the wall to provide a key and improve adhesion. A light coat or two of SBR or PVA on the wall will also help, especially on older dusty walls.
If you do find that your panels are not sticking to the wall, fine panel pins driven at an angle through the grooves and partially into the wall should do the trick. Once the adhesive has dried the pins can be removed and the holes filled with a black wood filler.
An alternative to pins would be to apply temporary pressure to the panels using pieces of furniture, step ladders, planks of wood etc leant against the panels in strategic places. Naturally you will need to protect the panels from any potential damage.
Why Choose Our T&G Panelling Packs?
- Convenient pack sizes – Each pack contains multiple panels in a range of sizes so you can choose the most cost effective option to panel your wall…
- 2400mm × 600mm (pack of 2)
- 1200mm × 600mm (pack of 5)
- 1000mm × 600mm (pack of 6).
- Multiple groove pitches – A wide range of “standard” groove spacings to ensure you get the perfect look for your interior design project…
- 50mm
- 75mm
- 100mm
- 120mm
- 150mm
- 200mm
- Two thickness options – Available in two thickness to suit your project needs, choose from…
- 11mm
- 19mm
- Ideal for any space – Perfect for feature walls, hallways, bedrooms, living rooms, and commercial interiors.
- Easy to cut – Because the panels have an MDF core they are easy to cut with the right tools.
- Easy to install – Panels can often be bonded to walls using nothing more than a wall panel adhesive.
- Lacquered and unlacquered options – Choose between unlacquered or pre-lacquered finish.
- Matching Dado Rails – A choice of matching dado rails to trim the top of your panels upon request.
Specifications
- Material – Oak veneer faced MDF.
- Brand – Finsa (11mm) & Decospan (19mm).
- Thickness – 11mm and 19mm
- Groove Size – 6mm wide x 3mm deep.
- Groove Pitch – 50mm, 75mm, 100mm, 120mm, 150mm & 200mm.
Options
- Matching Dado Rails – Matching Dado rails upon request.
- Pre-lacquering – pre-sanded then lacquered with a water based white primer.
- Certification – PEFC/FSC certification upon request.
Samples
Free samples of this product are available upon request. The size of the sample is relative to the pitch of the groove. Please email us at [email protected] confirming the product you require and the address you would like them sent to.
FAQs
Is the face real oak?
Yes.
Does this panelling need to be sealed?
Ideally yes. Doing so will protect it from greasy finger prints and the ingress of dust etc.
What lacquer can I use?
We would recommend a water based PU varnish although any interior water based or oil based lacquer/varnish would be suitable.
Are the panels moisture resistant?
No. Two coats of Lacquer/varnish all round will protect the panels from moisture.
Can the distance between the grooves be altered?
Yes, we can set the distance between the grooves to any distance you wish.
Do you provide a top trim for half height wall panelling?
Yes. We can supply either a black dyed or solid oak dado rail upon request.