Eucalyptus Tongue and Groove Wall Panelling
£1.00 excl. VAT
Eucalyptus Tongue and Groove Wall Panelling
£1.00 excl. VAT
A real-wood eucalyptus veneer faced tongue-and-groove wall panelling with a black dyed MDF core that is available cut to size to fit your wall or as individual panels.
- Material – Eucalyptus faced Black Dyed MDF
- Panel thickness – 10mm
- Panel Size – Cut to size and Full sheets.
- Max sheet size – 2400mm x 1200mm/1200mm x 2400mm
- Delivery – 3-7 working days.
Eucalyptus Tongue & Groove Wall Panelling
We manufacture our eucalyptus tongue-and-groove wall panelling using a high-quality eucalyptus quarter cut veneer faced black dyed MDF board.
The eucalyptus veneer has varying degrees of golden tones and hints of light pink running through it. If you are looking for a light wood T&G panelling, this could be the right board for you.
The panelling is currently only available in a thickness of 10mm with a maximum sheet size of 2400mm x 1200mm for portrait panels or 1200mm x 2400mm for the landscape version.
The grooves are 6mm wide x 3mm deep with six standard pitch variants including 50mm, 75mm, 100mm, 120mm, 150mm and 200mm.
If you would like to find out more about our Eucalyptus T&G panels, or discuss a particular project, then please call us on 01604 864888.
How to order Eucalyptus T&G Panelling Cut to Size
We provide two cut-to-size options. The first is based on the width of your wall; the other is for ordering individual cut to size panels. Additionally, we also offer this product in full size sheets.
Option 1: Enter your wall dimensions
If you select our Wall Size option, just enter your preferred panelling height and the overall width of your wall. We will take your overall dimensions and work out the optimum number of panels, all the correct spacings and ensure that there are no unsightly joins.
To add a second wall, add the first wall to your basket and then start the process again. If it is an adjoining wall, you will need to remove the thickness of the panelling from the overall length.
When ordering via this method, we assume the grooves will run vertically from floor to ceiling.
Option 2: Individual panel sizes
To order individual, cut to size panels, please select the Panel Size option and simply enter the dimensions you require for each panel.
You will also need to select the orientation of the panels, remembering that portrait orientation is tall and slim and landscape is short and wide
Whichever ordering method you choose, please ensure you select your preferred thickness and the pitch of the groove. We will ensure the spaces are centred and equally spaced along the board.
Specifications
- Material – Eucalyptus veneer faced black dyed MDF.
- Brand – Finsa
- Thickness – 11mm.
- Max Sheet Size – 2400 x 1200/1200 x 2400 (trimmed).
- Groove Size – 6mm wide x 3mm deep.
- Groove Pitch – 50mm, 75mm, 100mm, 120mm, 150mm & 200mm.
Options
- Cut to Shape – Available upon request.
- Finish – 20% Sheen water-based polyurethane (PU) Lacquer.
- Certification – PEFC/FSC certification upon request.
Samples
Free samples of this product are available upon request. The size of the sample is relative to the pitch of the groove. Please email us at [email protected] confirming the product you require and the address you would like them sent to.
FAQs
Can the veneer be stained?
Yes. Any wood stain product should be suitable. If you are using a coloured wood finish, we would advise you to check to see if it reacts with the black-dyed MDF. We can provide a small sample for testing if required.
Can the distance between the grooves be altered?
Yes, we can set the distance between the grooves to any distance you wish.
Can you cut this product to shape?
Yes.
Can you provide matching dado rail for this product?
Yes, we can produce a solid wood dado rail from Eucalyptus (Red Grandis) or a lower cost option is to use one of our black MDF dado rails.