*Please note: Actual product colours and tones may vary slightly due to photographic lighting, shadows, and screen settings.
A birch plywood bead and butt wall panelling with a plug-free B grade face veneer and a striking bead and butt groove detail.
- Material – Birch Plywood
- Panel thickness – various (see below)
- Panel Size – Cut to fit, cut to size & full sheets (2400mm x 1200mm)
- Bead pitch – Various (see below)
- Delivery – 5–7 working days
Please note: Adding lacquer may increase the lead time by approx. 3-5 working days
Birch Plywood Bead & Butt Wall Panelling
Produced from 100% birch plywood, this birch plywood bead and butt panel boasts a 1mm B grade face veneer that is entirely free from plugged repairs.
The bead and butt groove detail cuts through the layers of birch and picks up the colours of each layer to provide an aesthetically pleasing effect.
The panels are available with a choice of 50mm, 75mm, 100mm, 120mm, 150mm and 200mm bead spacing with bespoke options available upon request.
It is also available in a range of thicknesses, including 6mm, 9mm, 12mm, 15mm, 18mm & 21mm. For wall panelling attached directly to a wall the 6mm would be the best option.
To protect this board from moisture, dirty fingerprints and the ingress of dust, etc it will need to be protected with two coats of lacquer or varnish.
If you would like to find out more about this product or discuss a particular project, then please call us on 01604 864888.
How to order Bead & Butt Cut to Size.
We offer several convenient ways to order your bead and butt wall panelling…
- Wall size – pre-cut panels to fit your wall.
- Panel size – individual pre-cut panels to your dimensions.
- Full sheet – ready for you or your carpenter to cut to size.
Order Panels by Wall Size
Whether you’re panelling a single wall or an entire room, this is the easiest way to order your panels. Simply enter the height that you would like your panelling to be and the width of your wall. We will work out the optimum number of panels and ensure the end spacings are equal.
To add a second wall, save your first wall to your basket and then start the process again. If your second wall panel butts up against the first, you will need to remove the thickness of the panelling from the overall length of the second panel.
Please note…
Where relevant, you may need to take the height of your skirting board into account.
We will always assume the grooves run top to bottom, floor to ceiling. If you would like horizontal grooves instead of vertical, please let us know in your order notes.
Order Panels Cut to Size
Selecting the Panel Size option allows you to enter your own dimensions for the individual panels you require.
Don’t forget to select the orientation of the panels and remember that portrait orientation is tall and slim, whilst landscape is short and wide.
Whichever ordering method you choose, you will need to select your preferred thickness (when available) and bead spacings (pitch). We will ensure the bead spacings are centered correctly and equally spaced along the board, particularly on the ends.
Full sheets
You can order full sheets in either landscape or portrait format. In either case, the grooves will run vertically, from top to bottom.
If you would like your grooves to run horizontally, then order your panel in the opposite format, portrait instead of landscape, landscape instead of portrait, for example.
Specification
- Material – birch plywood.
- Thickness – various..
- Max Sheet Size – 2400 x 1200 (trimmed).
- Groove Size – 12mm wide x 3mm deep.
- Groove Pitch – 50mm, 75mm, 100mm, 120mm, 150mm & 200mm.
Options
- Finish – 20% Sheen water-based polyurethane (PU) Lacquer.
- Dado rail – available upon request.
- Samples – free samples available upon request (size subject to pitch).
- Certification – PEFC/FSC certification upon request.
